A common surface processing method for natural slate

Polished (Polished): natural stone surface is very smooth, highly polished, a mirror effect, a high gloss. Granite, Dali and limestone are usually polished and require different maintenance to maintain their luster.

Yoguang (Honed): natural stone surface smooth, but low degree of polishing, resulting in diffuse reflection, dull, no mirror effect, no light pollution.

Rough-Rubbing: natural stone surface of a simple polished, the cutting process in the formation of the machine cutting machine can not wear, the feeling is very rough matte processing.

Machine-Cut: The natural slate is cut directly from disc saws or bridge cutting machines, and the surface is rough and has a clear cut.

Pickling: the use of strong acid corrosion of natural stone surface, it has a small trace of corrosion, the appearance is more simple than the polished surface. Most of the stones can be pickled, but the most common is marble and limestone. Pickling is also a way to soften granite luster.

Litchi (Bushhammered): rough surface, rugged, is a chisel on the surface of the dense cut holes, there is a mimic water droplets over the years of the drop in the stone on an effect.

Pineapple (Picked): the surface is more uneven than lycheal processing, like pineapple skin in general.

Chiseled (Chiseled): also called long eyes, is the ax chop on the surface of natural stone, forming a very dense strip of texture, some like the effect of longan skin.

Flamed: The surface is rough. This surface is mainly used for interior such as flooring or commercial buildings for the finishes, higher labor costs. High temperature heating after the rapid cooling to form a fire surface. The fire surface is usually granite.

Nature Split: Commonly known as natural surface, its surface rough, but not as rough as rough fire. This surface treatment is usually done by hand cutting or in the mine chisel to expose the natural surface of the rock.

Tumbled: the surface is smooth or slightly rough, smooth edges and was broken. There are several ways to achieve the roll effect. 20 mm brick can roll in the machine, 3 cm brick can also be tumbled, and then split into two bricks. Marble and limestone are the preferred materials for tumbling. The same time as

Brushed: the surface of the old. The process is to scrub the stone surface, imitating the natural wear of the stone.

Water-jet: direct impact of natural stone surface with high-pressure water, stripped of soft texture of the composition, the formation of a unique decorative surface effect.

Antique (Antique): imitation of natural stone used after a certain number of years of the old effect of the surface processing, generally with the general use of antique grinding brush or antique water to deal with the general antique grinding brush effect and cost-effective, and more environmentally friendly.

Flaming + Brushed: first fire and then do antique processing.

Pickling + picking (Pickling + Brushed): first pickling after doing antique processing.

Sandblasted: Use ordinary river sand or King Kong sand instead of high pressure water to wash the surface of natural slate, forming a smooth sanding effect of the decorative surface.

Groove: Groove on a natural slate surface with a depth and width.

Mushroom (Mushroom): the general use of artificial chisel, the effect and natural cleavage similar, but the natural stone surface is the middle of the middle of the middle of the depression is the shape of the plateau.