How to clean up the burning wood fireplace

It is not necessary to clean up the ash that has just begun to gather. There is a 1 to 2 cm thick stove in the fireplace because they reduce the burning speed. Usually, when the thickness of more than 2 cm when the need to clean up. Follow the instructions below to clear the ashes.

How to clean up the burning wood fireplace

1, wait for the fireplace to cool completely (at least 2 hours after the last wood chartle goes out);

2, put a piece of cloth on the stove or cardboard ash, and can protect the stove will not be bad;

3, open the burning wood fireplace door, with a shovel to the furnace into the special metal bucket, the barrel must have a tight cover. Covered barrels should be placed on the non-combustible ground, away from flammable materials, waiting for the final treatment; (in general, there are sets of dust tank installed in the bottom of the ash tank, out of the collection tank can easily dump the ash)

4, if the ash buried in the soil, or scattered on the ground, should be so that the furnace in the well after the complete cooling of the container and then carried out.

5. After confirming that the ash is completely extinguished, use a special vacuum cleaner to clean the remaining ash in the furnace.

Note: chaos pouring ash may cause a fire. The hot stove into the carton, down in the backyard or stored in the garage are fire hazards. Often the seemingly extinguished stucco may contain an ashes that are not completely extinguished, and flammable materials may be resurgent.