Granite ground is too slippery how to deal with

Granite floor non-slip treatment of tiles is too slippery how to do

Advantages of ground anti-skid handling

1, can be handled at any time when the user is convenient, usually small area can be completed within a few hours, the unit can be normal business, will not be reduced to.

2, the user only need to provide the required power, water and drain.

3, after the anti-skid treatment will not affect the original ground beauty and cleaning and maintenance work.

4, Tou step on the ground after the anti-skid effect is obvious, the use of a long period of time.

Some Requirements for Follow - up Cleaning and Maintenance of Floor

To maintain the anti-skid handling of the ground after a lasting effect, the follow-up cleaning and maintenance work is extremely important.

Cleaning method 1, each cleaning before the use of cleaning tools, such as: mop, long handle brush, wiper, suction machine, grinding machine, etc. to make the first cleaning to ensure that the cleaning tool in a clean state , To avoid the ground in the cleaning without secondary pollution.

2, after the road security slippery treatment of the ground, to be regularly cleaned, regular (such as: kitchen, restaurants need to keep every day) with a tile cleaner even spilled or flat with wet coating on the ground, and then use long handle brush Or grinding the washing machine to scrub.

3, and then rinse with water, and finally with a clean mop to dry or wipers dry or suction machine dry. As a result, the anti-slip effect will immediately show and maintain the anti-slip effect long and better.

Principle of the ground anti-skid agent should choose water-soluble, non-toxic and tasteless, colorless and transparent, will not change the appearance of the ground itself, the construction is simple and convenient for popular and convenient construction. The route of the anti-slip agent has a strong penetration, can effectively penetrate the ground capillary, through the chemical action with the floor tiles, so that the pipeline widened, with water or grease when the contact with the soles of the feet to form a physical sucker, Slim, the effect is more remarkable, suitable for all kinds of stone surface, such as marble, tiles, artificial granite, concrete, polished tiles, ceramics, bathtub and so on. People above it safe! Even if the future part of the surface wear, the internal part of the existing part of the change is stable and have a certain depth, which can maintain long-term anti-skid effect! Before and after the use of the surface friction coefficient can be increased from the general 0.2-0.4 to 0.8-0.9. Conventional use of the frequency can be maintained for more than 10 years of anti-skid effect, road safety ground anti-skid agent for the polymer water-based polymer, after use will not produce harmful to humans.

Ground anti - skid processing applications

First, entertainment and leisure: aisle, ladder, hall, kitchen, guest bathroom, bathtub, swimming pool and so on.

Second, schools: foyers, walkways, ladder, restaurants, toilets, bathrooms and so on.

Third, the hospital: the hall, aisle, ladder, restaurant, toilets, bathroom.

Fourth, municipal construction: platform, hall, road, flyover, tunnel, ladder and so on.

Fifth, enterprises: foyers, walkways, ladder, workshops, restaurants, toilets, bathrooms and so on.

6, sports system: hall, walkway, ladder, restaurant, toilets, shower room, locker room and so on.

Seven, shopping malls: hall, walkway, ladder, toilets.

Eight, residential: foyer, walkway, ladder, kitchen, bathroom.

We listen to friends with the recommendations:

Jdcxtony

Rust can be washed with 2% oxalic acid solution at about 50 degrees warm water and rinsed with water. Such as rust and hard stains, available 10% oxalic acid solution, in addition to grease, the most economical way to use dipped in detergent cloth, dipped in wood chips Sassafras to clean up so far. Dip the wood chips on the Granite, it will not hurt the Granite surface.

May 06, 2016

Mr. Ju

You can use the wind sauce to try, no words, the supermarket has to sell a special range of hood with the grease, you can go to the oil, rust, then, only the place to wear scissors can buy rusty powder. Will be dyed with water to wet. Then the edible salt painted. Then the hand repeatedly light rub. Dyed color will be gone. You can clean with water.

May 06, 2016

Merry31

Potassium permanganate and acetic acid, the practice is to first dissolve a little potassium permanganate in water, and then rinse the clothes into it, to fully soak, soak 10 to 20 minutes later, the clothes will be dark red, the clothes picked up, Wash the water; then a little acetic acid dissolved in water, soaked in potassium permanganate clothes into the acetic acid solution, the clothes will be slowly changed from dark red to the original color, and stained the color of the place also Faded and will not damage the original color of the clothes, sometimes wearing yellow clothes can also use this approach.

from:Granite